STM32F407VET6 (32bit Arm Cortex M4 + FPU) Based Industrial Control Board IOT with Dual CAN, Ethernet,  RS485, RS232, TF Card, USB Host & USB Device Interface:

Description:
Micro Controller: STM32F407VET6 (32bit Arm Cortex M4 + FPU)
Package Type: LQFP100
Kernel: ARM Cortex-M4 with FPU
Operating frequency: 168MHz
Storage resources: 512K Byte Flash, 192KByte CCM SRAM

Interface Resources:
SWD interface: JTAG / SWD/ JLink / STLink
USB interface: Master USB / Slave USB
USART1 interface: RS232 / RS485
CAN: CAN1 / CAN2
Temperature Sensor: DS18B20
TF Card: Micro SD
Ethernet: 1 X Ethernet

Other Deviceice Description:
Ethernet Chip: DP83848-LQFP48
Power LED (PWR): x 1
User LEDs : x 3 ( on pins PE13/PE14/PE15)
Osc: 25M Crystal  & 32.768KHz Crystal (RTC)
User Buttons: x 3 Push Buttons
RF Comms: NRF24L01 interface
Power Input: DC +5V Input & USB

Programming IDEs:
STM32 Cube - Download Here
Arduino IDE - Download

Articles:
https://github.com/art103/JZ-F407VET6

Programming with Arduino IDE Using STLink V2:

1. Download and install Arduino IDE 2.2.1 on your PC (Latest Version).

2. Install support package:
File -> Preference => additional Board Manager URLs:
Enter the following url and click OK.
"https://github.com/stm32duino/BoardManagerFiles/raw/main/package_stmicroelectronics_index.json"

From Tools -> Manage Libraries
Search for STM32 and install the package:
"STM32 MCU based boards by STMicroelkectronics"

Select the Board:
Tools -> Bord -> STM32F4 Boards(Arduino_STM32) -> Generic STM32F407V mini series

Upload Method:  STLink

ST Link Connection: