Reading BME280 - Arduino:Hardware required:- BME280 Sensor board- Arduino UNO Wiring:Install BME280 Libraries: Github Page: BME280 To install the library, from Arduino IDE (2.3.x),  Click...

Simple Access control Using RFID MFR-522:Hardware Required:1.  RFID MFRC-5222.   RFID Tag3. Arduino UNOFirst, go to the following Github page and download the RFID Library master.z...

Toyota-Prius CAN Bus Message Monitor:This project based on the  GitHub- coryjfowler/MCP_CAN_lib: MCP_CAN Library.Needs the following Parts:1. OBDII connector2. DB9 (Female Connect...

Remote Monitoring UV sensor data using LoRa Ebyte E32 Transceiver:Components: - 2 x ESP8266 D1 Mini” - 2 x Lora Ebyte E32 Transceiver module - 1 x ML8511 UV SensorSend and receive UV sensor data...

Data Logging & Monitoring Temperature on ThingSpeak - IOT:1.   Create an account on ThingSpeak.com . It is free for personal use.      Once you created...

Capturing live text stream from GLONAS GPS Unit:Introduction:The Global navigation Satellite Systems (GNSS) is the backbone behind Global Positioning Systems (GPS).GPS one of the five GNSS constellati...

Remote Control with SIM800 & Arduino UNO:This sample project uses the SIM800L module with Arduino UNO. The software serial port uses D3(RX) and D4(TX) pins of the UNO  to communicate with ...