MG90S micro servo motor, updated SG90 serve motor.
Dimensions: 23 x 12.2 x 29mm
Operating Speed (4.8V no load): 0.11sec / 60 degrees
Operating Speed (6.0V no load): 0.10sec / 60 degrees
Stall Torque (4.8V): 2.0 kg/cm
Stall Torque (6.0V): 2.5 kg/cm
Temperature Range: 0 to 55 degree C
Dead Band Width: 15 Microsecond
Operation Voltage: 4.8 - 6.0 Volts
Recommend Model: Mini Car / Mini Ship /Helicopter & Airplane
Metal Gear / Full Ball Bearing / Light Weight / Less Noise
Mini micro Servo 450Dead band width: 10usec.
Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi, etc.
Gear Micro Servo Motor For robot Plane Helicopter Boat Car Horns servo Remote controlled aircraft for DIY.
The model is suitable for ordinary small electric aircraft models and is not recommended in large fixed wing and electric helicopter.
The use of superior waterproof ABC hard shell.
Pin-1 (Brown): GND
Pin-2 (Red): +5V
Pin-3 (Orange): PWM
The PWM signal produced should have a frequency of 50Hz ( period should be 20ms).
Out of which the On-Time can vary from 1ms to 2ms.
So when the on-time is 1ms the motor will be in 0° and when 1.5ms the motor will be 90°.
Similarly when it is 2ms it will be 180°.
So, by varying the on-time from 1ms to 2ms the position can be controlled from 0° to 180°.
MG90S Micro Metal Gear 9g Servo for RC Plane Helicopter Boat Car 4.8V- 6V
- Product Code: MG90S
- Availability: In Stock