ESP32 WROOM-32E WIFI Espressif Dual-Core Wi-Fi & Bluetooth Module:

ESP32-WROOM-32 is a generic Wi-Fi + BT + BLE MCU module that target a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding, Music streaming and MP3 decoding.
It comes with a PCB Antenna and 4MB external flash. 
The integration of Bluetooth, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted, and that the module is all-around: using Wi-Fi allows a large physical range and direct connection to the Internet through a Wi-Fi router, while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection.
The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications.
The module supports a data rate of up to 150 Mbps, and 20 dBm output power at the antenna to ensure the widest physical range.
As such the module does offer industry-leading specifications and the best performance for electronic integration, range, power consumption, and connectivity. The operating system chosen for ESP32 is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well.
Secure (encrypted) over the air (OTA) upgrade is also supported, so that users can upgrade their products even after their release, at minimum cost and effort. 


Features:
Processor: Xtensa® dual ­core 32­bit LX6 microprocessor up to 240 MHz
Clock: Up to 240Mhz
Oscillator: 40Mhz Crystal
Memory: 448KB ROM, 520KB SRAM, 16KB SRAM in RTC 
Flash Memory:  4MB (External)
Digital I/O:  32 (26 usable)
PWM: 16 Channels
Analog O/P: 2 Channels (8Bit)
Analog I/P: 12 Channels (12Bit)
PWM: 16 Channels
Communications:  3xSerial, 4 SPI,  2 I2C, CAN bus, I2S Stereo
Integrated Sensors:  SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC, TWAI®
Bluetooth: 4.2 and BLE (Bluetooth Low Energy)
Wi-Fi:  Built-in 802.11 b/g/n  2.4GH
Operating Voltage: 3.3V internal and I/O 


Arduino compatible
It can also be programmed using the Espressif IDF, Microphytoon, LUA and other programming environments.


Download Datasheet here.



Write a review

Please login or register to review

ESP32 WROOM-32E WIFI Espressif Dual-Core Wi-Fi & Bluetooth Module

  • Product Code: ESP32 WROOM-32E Module
  • Availability: In Stock
  • $10.50


Related Products

ESP32 ESP-WROOM-32 Ultra-Low Power Dual Core  Development Board USB (TYPE-C) CP2102 WiFi + Bluetooth

ESP32 ESP-WROOM-32 Ultra-Low Power Dual Core Development Board USB (TYPE-C) CP2102 WiFi + Bluetooth

ESP32  ESP-WROOM-32 Ultra-Low Power Dual Core  Development Board USB (TYPE-C) CP2102 ..

$14.50 $16.00

Tags: ESP32, WROOM-32E, WIFI, Espressif, Dual-Core, Wi-Fi, Bluetooth, Module